Dahua IPC-HFW2431T-ZS-S2 User Manual

Procedure
Step 1 Select Setting > Event > Video Detection > Scene Changing.
Figure 5-25 Scene changing
Step 2 Set arming periods and alarm linkage action. For details, see "5.1.1 Alarm Linkage".
Step 3 Click Save.
5.5 Setting Smart Motion Detection
The system performs alarm linkage when human, non-motorized vehicle, or motor vehicle appear
on the image and its moving speed reaches the preset sensitivity. Enabling smart motion detection
can avoid the alarms triggered by the environment changes, and the function is enabled by default.
Prerequisites
●
Select Setting > Event > Video Detection > Motion Detection to enable the motion detection
function.
●
You have set Period and Area in Motion Detection, and make sure that the sensitivity value is
larger than 0, and the threshold value is smaller than 100.
Procedure
Step 1 Select Setting > Event > Smart Motion Detection.
Operation Manual
155

Dahua IPC-HFW2431T-ZS-S2 Specifications

General

Brand	Dahua
Model	IPC-HFW2431T-ZS-S2
Category	Security Camera
Language	English