Figure 5-73 Heat map
Step 2 Select the Enable check box to enable the heat map function.
Step 3 Set the arming period. For details, see "5.1.1.1 Setting Period".
Step 4 Click Save.
5.13.2 Viewing Heat Map Report
The system can export heat map data as a report.
Procedure
Step 1 Select Setting > Event > Heat Map > Report.
Figure 5-74 Heat map report
Step 2 Set the start time and end time.
Only some devices support heat map sequence numbers.
Step 3 Click Search to complete the report.
Click Export to export the statistical report.
Operation Manual
199
To Next Page
Loading...
Need help?
General
