Parameter Description
Pixel Counter
Click Draw Target next to Pixel Counter, and then press and hold the
left mouse button to draw a rectangle, the Pixel Counter then displays
its pixel.
Step 7 Set arming periods and alarm linkage actions. For details, see "5.1.1 Alarm Linkage".
Step 8 Click Save.
To view alarm information on the Alarm tab, subscribe relevant alarm event. For details,
see "5.1.2 Subscribing Alarm".
Results
The face detection result is displayed on the Live page.
●
The face pictures captured in real time and their attribute information is displayed.
●
Click a face picture in the display area, and the details are displayed.
Figure 5-63 Face detection result
5.12 Setting People Counting
People counting (including enter number, leave number and strand number in area), calibration
conguration, queuing number, and view the people counting data in report form.
5.12.1 People Counting
The system counts the people entering and leaving the detection area. When the number of
counted people exceeds the congured value, the system performs an alarm linkage.
Prerequisites
Select Setting > Event > Smart Plan, and then enable People Counting.
Operation Manual
188
To Next Page
Loading...
Need help?
General
