6
Fence station is normally used when other servers work as SIP
server.
Configure the number of the management centre, and you can call the
management centre on every VTO or VTH in the network. The default
number is 888888.
Time period in which you are allowed to call the management centre.
The VTO number can be used to differentiate each VTO, and it is normally
configured according to unit or building number. You can add VTO devices
to the SIP server with their numbers.
All the snapshots would be saved to the SD card in the villa station
automatically.
Auto Snapshot (unlock)
Select ON to enable this function, and then the system takes snapshot
every time when the door is unlocked.
Auto Snapshot (talking)
Select ON to enable this function, and then the system takes snapshot
every time when VTH user answers a call from the VTO.
Messages
Select ON to enable this function, and then the system uploads the
messages from visitors to the SD card automatically.
If there is an SD card in the main VTH, the left messages would be
saved to the SD card of the main VTH by default.
To receive message, the VTO Message Time must be configured to
be more than 0. See the VTH user's manual.
Click Confirm. Step 3
4.1.2 Façade Layout (Only for VTO3211D)
If you select 1 form the Count drop-down list, only the third button will be valid; if you select 2,
only the second and the fourth buttons will be valid; and if you select 4, all the four buttons will
be valid.
To Next Page
Loading...
Need help?
General
