4
3 Main Interface
Log in to the web interface of the VTO, and then the main interface is displayed.
Main interface Figure 3-1
Table 3-1 Main interface introduction
Click to change the password and your email
address.
Click to go to the main interface.
Click to log out, reboot the VTO or restore the VTO
You can view the general information of the VTO, including
building No., unit No., device type, and VTO No..
You can view the software version, MCU version, and security
baseline version.
Select Device Info or User Info, and then you can export the
VTO configuration or user information to the PC or import them
from it.
Click the buttons to go to the corresponding menu.