5
4 Local Setting
This chapter introduces how to configure VTO type, VTO No., video and audio, access
password, system time, and security function.
General operations:
After configuration, click Confirm to save, and click Refresh to view the latest change.
If you click Default, all the configurations in the current page would be restored to the
default, and you need to click Confirm to save.
Basic 4.1
4.1.1 Device Properties & Events
This section introduces the configuration of VTO device type, VTO number, and auto storage.
On the main interface (Figure 3-1), select Local Setting > Basic. Step 1
Basic Figure 4-1
Configure parameters. Step 2
Table 4-1 Basic parameter description
Keep the default value.
Building number and unit number are available only when other
servers work as SIP server. See "6.2 SIP Server."
To Next Page
Loading...
Need help?
General
