18
Enter a username, click Save, and then click Confirm Send Card at the countdown Step 3
notice (Figure 5-7).
Issued access card
Figure 5-9
You can modify card information. Step 4
Click to set it to the main card, and then the icon turns into . The main card
can be used to issue access card for this room on the VTO. Click again to resume.
Click to set the card to the lost state, and then the icon turns to . The card
under lost state cannot be used to open the door. Click again to resume.
Click to modify the user name.
Click to delete the card.
VTS Management 5.3
You can add VTS device to the SIP server, and the VTS can be used as the management
center. It can manage all the video door phones in the network, make or receive video calls,
and make basic configurations. For details, see the VTS user's manual.
Log in to the web interface of the SIP server, and then select Household Setting > Step 1
VTS Management.
VTS management Figure 5-10
Click Add. Step 2
To Next Page
Loading...
Need help?
General
