Dahua KTP02

14
Add VTO Figure 5-2
Configure the parameters. Step 3
Table 5-1 Add VTO configuration
Parameter
Description
Rec No.
The VTO number you configured for the target VTO. See the details
in "Table 4-1."
Register Password
Keep default value.
Build No.
Available only when other servers work as SIP server.
Unit No.
IP Address
The IP address of the target VTO.
Username
The user name and password for the WEB interface of the target
VTO.
Password
Click Save. Step 4
5.1.2 Modifying VTO Information
The VTO that is currently at use cannot be modified or deleted.
On the VTO No. Management interface (Figure 5-1), click . Step 1