To Next Page

To Previous Page

6 Network Setting

This chapter introduces how to configure IP address, SIP server, DDNS, and UPnP.

Basic 6.1

6.1.1 TCP/IP

You can modify the IP address and port number of the VTO.

Select Network Setting > Basic. Step 1

TCP/IP and port Figure 6-1

Enter the network parameters and port number, and then click Save. Step 2

The VTO will restart, and you need to modify the IP address of your PC to the same

network segment as the VTO to log in again.

6.1.2 Port

6.1.2.1 Creating Server Certificate

Click Create Server Certificate, enter needed information, click Save, and then the

terminal will restart.

Dahua KTP02 User Manual

Questions and Answers: