7
Façade layout Figure 4-2
Video & Audio 4.2
This section introduces how to configure the format and quality of video that captured by VTO,
and the audio control settings.
On the main interface (Figure 3-1), select Local Setting > Video & Audio. Step 1
Video & audio Figure 4-3
Configure parameters, and these configurations will take effect immediately. Step 2
Table 4-2 Video parameter description
Select the video resolution from 720P, WVGA, and D1.
Configure the number of frames in 1 second. You can select
from 1 to 25 under PAL, and 1 to 30 under NTSC video
To Next Page
Loading...
Need help?
General
