22
SIP server Figure 6-3
Select the server type you need. Step 2
If the VTO you are visiting works as SIP server
Select the Enable check box at SIP Server, and then click Save.
The VTO will reboot, and after rebooting, you can then add VTO and VTH devices
to this VTO. See the details in "5 Household Setting."
If the VTO you are visiting does not work as SIP server, do not select the Enable check
box at SIP Server, otherwise the connection will fail.
If other VTO works as SIP server
Select VTO in the Server Type list, and then configure the parameters.
Table 6-1 SIP server configuration
The IP address of the VTO which works as SIP server.
The user name and password for the web interface of the SIP
server.
If other servers work as SIP server
Select the server type you need at Server Type, and then see the corresponding
manual for the detailed configuration.
Firewall 6.3
Firewall is only for engineers. Select as needed.
To Next Page
Loading...
Need help?
General
