Dahua Mobile DVR Series - Alarm Event Configuration; Setup Menu

106
Figure 5-13
5.5 Alarm
Click alarm function, you can see an interface is shown as Figure 5-14.
Here you can set device alarm type and alarm sound setup.
Figure 5-14
Please refer to the following sheet for detailed information.
Please make sure current device can upload the alarm.
Type
Parameter
Function
Alarm
Type
Video loss
System generates an alarm when video loss
occurs.
Camera
masking(Tampering)
System generates an alarm when camera is
viciously masking.
Disk full
System generates an alarm when disk is full.
Disk error
System generates an alarm when disk error
occurs.
External alarm
Alarm input device sends out alarm.
Temperature high
System generates an alarm when temperature
is high.