System generates an alarm when battery
voltage is low.
Check the box here, system can automatically
pops up an alarm icon on the Alarm button in the
main interface when there is an alarm.
System sends out alarm sound when an alarm
occurs. You can specify as you wish.
Here you can specify alarm sound file.
5.6 Setup
5.6.1 Image
Here you can view device property information. The setups become valid immediately after you
set.
In the main window, from Setup->Channel ->Conditions, enter condition interface. See Figure
5-15.
Figure 5-15
Please refer to the following sheet for log parameter information.
Please select a channel from the dropdown list.
It divides one day (24 hours) to two periods. You can set
different hue, brightness, and contrast for different periods.
It is to adjust monitor video brightness and darkness level. The
default value is 50.
The bigger the value is, the large the contrast between the bright
and dark section is and vice versa.
It is to adjust monitor window brightness. The default value is 50.
The larger the number is , the bright the video is. When you
input the value here, the bright section and the dark section of
To Next Page
Loading...
