Dahua Mobile DVR Series - Storage

124
Figure 5-32
Please refer to the following sheet for detailed information.
Parameter
Function
Auto
The corresponding event triggers the alarm output or cancels alarm.
Manual
Forcedly trigger alarm output.
Close
Forcedly cancel or close alarm output.
Status
Here you can view alarm output port status. The alarm is enabled if the
icon is highlighted.
5.6.4 Storage
5.6.4.1 Schedule
In this interfaces, you can add or remove the schedule record setup. See Figure 5-33.
There are three record modes: general (auto) and alarm. There are six periods in one day. Please
make sure you have enabled the corresponding record mode in the Setup->Storage->Conditions.
You can view the current time period setup from the color bar.
 Green color stands for the general record/snapshot.
 Red color stands for the alarm record/snapshot.