Dahua Mobile DVR Series - Monitor Window

97
Figure 5-2
Please refer to the following sheet for detailed information.
SN
Name
Function
1
System
menu
It includes live, playback, alarm, setup, info and logout.
2
Channel
Click a channel to view realtime video.
3
Start talk
You can click this button to enable audio talk. Click 【▼】 to select
bidirectional talk mode. There are four options: DEFAULT, G711a,
G711u and PCM. After you enable the bidirectional talk, the Start talk
button becomes End Talk button and it becomes yellow.
Instant
record
Enable all-channel manual record. The record type is general.
Local
playback
Refer to chapter 5.3.5 Local playback for detailed information.
4
Window
mode
Refer to chapter 5.3.3 Window mode for detailed information.
5
Alarm output
1/2 refers to the alarm output port of the rear panel.
6
PTZ control
Refer to chapter 5.3.4 for detailed information.
5.3.2 Monitor Window
Click a channel name, select main stream or sub stream. See Figure 5-3.
Figure 5-3