Dahua Mobile DVR Series - Page 109

98
Select main stream (sub stream), now you can go to Figure 5-4.
Figure 5-4
Please refer to the following sheet for detailed information.
SN
Name
Function
1
Display channel
information
When there is video, it is to display “Device IP-Monitor
channel number-network bit stream-decode mode”.
Otherwise, it shows as “No video”.
Note
M=main stream, S=sub stream.
2
Date and time
It is to display system current date and time.
3
Digital zoom
Click this button and then left drag the mouse in the zone
to zoom in. right click mouse system restores original
status.
4
Record
When you click local record button, the system begins
recording and this button becomes highlighted. You can
go to system folder RecordDownload to view the
recorded file. Refer to 5.6.1.1.6 to change path.
Note
Record file name：Device model_ch_Main stream or
Sub stream_start time（YMDHMS）.dav.