Dahua Mobile DVR Series - Event and Alarm Management

48
c) Please refer to chapter 4.9.1 to select a picture you want to view.
4.9.4 File List
Click ，
Enter file list interface. See Figure 4-42.
Figure 4-42
4.10 Event
4.10.1 Video Detect
In the main menu, from Setting to Detect, you can see an interface shown as in Figure 4-43.
There are three detection types: Motion detect/video loss/tampering.
4.10.1.1 Motion Detect
After analysis video, system can generate a motion detect alarm when the detected moving signal
reached the sensitivity you set here.
Step 1 From main menu->Setting->Video detection, enter detection interface. See Figure 4-43.