System enables schedule record function if the boot up is within the specified period. The
corresponding record indicator light becomes on and system runs normally.
4.1.3 Login
Step 1 After device booted up, right click mouse, system pops up the following dialogue box.
See Figure 4-1.
Figure 4-1
Step 2 Select a user, and then input a password.
System consists of two accounts:
Username: admin. Password: admin. It is the admin group user.
Username: 888888. Password: 888888. (It is the admin group user. For local login
only. Cannot login via WEB.)
WARNING
For security reason, please modify password after you first login.
Continuous three times login failure will result in system alarm and five times login
failure will result in account lock!
Please reboot the device or wait for 30 minutes to try again if your account has been
locked.
Step 3 Click OK to Login.
4.1.4 Startup Wizard
Note
From main menu->Setting->System->General, you can enable/disable Startup wizard function.
The startup wizard includes some general functions such as general, encode, record, record
control, auto register, auto maintenance, TV adjust and network.
Step 1 After you successfully set the password, it goes to startup wizard.
Note
Check the box Startup button here, system goes to startup wizard again when it
boots up the next time.
To Next Page
Loading...
