Dahua Mobile DVR Series - Information

139
Parameter
Function
Address
Set corresponding dome address. Default value is 1. Please
note your setup here shall comply with your dome address;
otherwise you cannot control the speed dome.
Baud Rate
Select the dome baud rate. Default setup is 9600.
Data Bit
Default setup is 8. Please set according to the speed dome dial
switch setup.
Stop bit
Default setup is 1. Please set according to the speed dome dial
switch setup.
Parity
Default setup is none. Please set according to the speed dome dial
switch setup.
5.6.6 Information
5.6.6.1 Version
From main menu->Info->Version, the version interface is shown as in Figure 5-52.
Here you can view system hardware features, software version, release date and etc. Please note
the following information for reference only.
Figure 5-52
5.6.6.2 Log
From main menu->Info->Log, enter system log interface. See Figure 5-53.