Dahua Mobile DVR Series - Custom Default

88
Step 1 From main menu->Info->Event->Gyo, the interface is shown as below. See Figure 4-94.
Figure 4-94
Step 2 Set parameters.
 Acceleration speed: It is to display vehicle acceleration speed.
 Gyro: it is to display vehicle gyro speed.
 Temperature: Display temperature value.
 Car type: Please select a vehicle from the dropdown list. It includes small vehicle, medium
vehicle and bus.
 Reset: Click to reset vehicle position.
 Vehicle head side shaft type: It is to set shaft type. It includes undetermined, X axis, Y axis
and etc.
 Tilt angle of slope: it is to set tile angle.
Step 3 Click OK button.
4.16.3 Custom Default
It is to save the plate setup, 3G setup, auto register setup.
Step 1 From main menu->Vehicle->Custom default, enter custom default interface. See Figure
4-95.