Figure 5-67
Please refer to the following sheet for detailed information.
Check the box here to enable tour function.
Here is for you to adjust transparency. The value ranges from 5 to
120s. The default setup is 5s.
Here you can set window mode and channel group. System can
support 1/4-window according to device channel amount.
Here you can set motion detect tour/alarm tour window mode.
System supports 1/4-window now.
5.6.8 Sensor
5.6.8.1 Speed
It is to view vehicle speed information.
From main window->Setup->Vehicle->Sensor->Speed, the speed interface is shown as in Figure
5-68.
To Next Page
Loading...
