4.14.3 TV Adjust
Here is for you to adjust TV output setup.
Step 1 From main menu->Advanced->TV adjust, enter TV adjust interface. See Figure 4-80.
Figure 4-80
Step 2 Please drag slide bar to adjust each item.
Step 3 Click OK button.
4.14.4 RS232
It is to set RS232 function, baud rate and etc. Please set RS232 parameters if you want to use
COM to debug, upgrade applications and etc.
Step 1 From Main Menu->Setting->System->RS232, RS232 interface is shown as below. There
are six items. See Figure 4-81.
Figure 4-81
To Next Page
Loading...
