Dahua Mobile DVR Series - Date and Time Settings

131
Figure 5-40
Please refer to the following sheet for detailed information.
Parameter
Function
Date format
Here you can select date format from the dropdown list.
Time
Format
There are two options: 24-H and 12-H.
Time zone
The time zone of the device.
System
time
It is to set system time. It becomes valid after you set.
Sync PC
You can click this button to save the system time as your PC current
time.
DST
Here you can set day night save time begin time and end time. You
can set according to the date format or according to the week format.
NTP
You can check the box to enable NTP function.
NTP server
You can set the time server address.
Port
It is to set the time server port.
Interval
It is to set the sync periods between the device and the time server.
Time Sync
Mode
There are three sync modes: DSS/GPS/NTP.
 DSS: After device connected to the DSS, it can sync time with the
DSS.
 GPS: After device connected to the GPS antenna, it can sync
time with current time zone and satellite.
 NTP: After set NTP, device can sync time with the NTP server.