Figure 4-50
4.11.1.1 Alarm set
Please refer to chapter 4.10.2 for detailed information.
4.11.1.2 Alarm Release
Click to restore alarm output state.
4.11.1.3 HDD Detection
The HDD detect function is to detect HDD current status so that you can clearly understand the
HDD performance and replace the malfunction HDD.
There are two detect types:
Quick detect: It is to detect the storage files on the HDD. You can use format function to repair
the bad track. System cannot detect the bad track if there is no record on the HDD.
Global detect: It detects the whole HDD. The process may take a long time and may affect
the HDD that is saving the record. If it detects the bad track, it may result from the damaged
HDD.
4.11.1.3.1 Manual Detect
From main menu->Setting->Advanced->HDD, click HDD detect button, the interface is shown as
below. See Figure 4-51.
Please select detect type and HDD. Click start detect to begin. You can view the corresponding
detect information. See Figure 4-52.
To Next Page
Loading...
