Step 2
Set the conditions according to actual needs, click “Search”. The system will display the search results.
5.3.5.2.2 Registration
Step 1
Click ‘Registration” on the more info interface of face database. The system will display the interface
which is shown in Figure 5-70.
Figure 5-70
Step 2
Click ‘Upload Picture” and set relevant info according to the actual situation.
The system will display the interface which is shown in Figure 5-71.
Note
The device supports selecting face area manually, after the picture is uploaded, you can select face
location and then click “OK” to save face picture. Please select target face if there are several faces in
the picture, click ‘Ok” to save the picture of target face.
To Next Page
Loading...
