Dahua Network Camera Web 3.0 - Https

Dahua Network Camera Web 3.0 Operation Manual
67
Figure 5-41
Please refer to the following sheet for detailed information.
Parameter
Function
Real-time
monitor
The value ranges from 0 to 63. The router or the switcher can
provide different service for various data packets.
Command
The value ranges from 0 to 63. The router or the switcher can
provide different service for various data packets.
Enable
Wireless QoS
Check it to enable QoS.
5.2.13 HTTPs
In the HTTPs setting interface, users can make PC log in normally via HTTPs by creating certificate or
uploading signed certificate, which is to guarantee the security of communication data and provide
safeguard for user information and device security with reliable and stable technical means.
Step 1
Create certificate or upload the signed certificate.
 Please refer to the following steps if you select “Create Certificate”.
1. Select “Setup > Network > HTTPs”, and the system will display the interface of HTTPs, which is
shown in Figure 5-42.