Dahua Network Camera Web 3.0 - Account

Dahua Network Camera Web 3.0 Operation Manual
124
Figure 5-107
Please refer to the following sheet for detailed information.
Parameter
Function
Date format
Here you can select date format from the dropdown list.
Time
Format
There are two options: 24-H and 12-H.
Time zone
The time zone of the device.
Current
Time
It is to set system time. It becomes valid after you set.
Sync PC
You can click this button to save the system time as your PC current
time.
DST Enable
Here you can set both begin and end time of daylight saving time.
You can set according to the date format or the week format.
Synchronize
with NTP
You can check the box to enable NTP function.
NTP server
You can set the time server address.
Port
It is to set the time server port.
Update
period
It is to set the sync periods between the device and the time server.
5.5.2 Account