Dahua Network Camera Web 3.0 - Login and Logout; Log in WEB Interface

Dahua Network Camera Web 3.0 Operation Manual
4
Figure 2-3
Step 5
Click Save and device initialization is completed.
2.2 Login and Logout
Here it is to introduce device login and WEB interface logout via browser, it is to take IE Explorer 8 as
an example to make introduction.
2.2.1 Log in WEB Interface
Users can make operations such as live, playback and config upon the device after logging in device
WEB interface via browser.
Note
 It can log in WEB interface after device initialization is completed.
 It will prompt to install plug-in when logging in the system for the first time, please download and
install plug-in according to prompt.
Step 1
Open IE browser, input camera IP address in the address bar and click Enter button.
The system will display the Login interface after it is successfully connected, which is shown in Figure
2-4.