Dahua Network Camera Web 3.0 - Audio Detection

Dahua Network Camera Web 3.0 Operation Manual
84
Parameter
Function
Send Email
If you enabled this function, System can send out email to alert you when
alarm occurs and ends. User can set email address in Network>SMTP.
PTZ
 Here you can set PTZ movement when alarm occurs. Such as go to
preset x when there is an alarm.
 The event type includes: preset, tour and pattern.
Snapshot
You need to check the box here so that system can backup motion detection
snapshot file. You shall set snapshot period in Storage>Schedule.
Step 4
Click “Save” to complete the setup of scene changing.
5.3.2 Audio Detection
Step 1
Select “Setup > Event > Audio Detection” and the system will display the interface of “Audio Detection”
which is shown in Figure 5-59.
Figure 5-59
Step 2
It is to set the parameters of audio detect, please refer to the following sheet for more details.