Dahua Network Camera Web 3.0 - Settings and Configuration; Camera Settings

Dahua Network Camera Web 3.0 Operation Manual
27
5 Setting
Web client setup support camera, network, time, storage, system and system info view.
5.1 Camera
The camera setting includes conditions, profile management, zoom and focus.
5.1.1 Conditions
Note:
The camera parameter may be different according to different models, please refer to the actual product
for more details.
5.1.1.1 Picture
Note:
The device which supports true WDR fails to support long exposure when true WDR is enabled.
Step 1
Select “Setup > Camera > Conditions > Picture” and the system will display the “Picture” image which is
shown in Figure 5-1.
Figure 5-1
Step 2
Set picture parameters; please refer to the following sheet for more details about parameter setting.