Dahua Network Camera Web 3.0 - Function of Play

Dahua Network Camera Web 3.0 Operation Manual
18
4.1.1 Function of Play
The function of play is shown as in Figure 4-2 and Figure 4-3.
Figure 4-2
Figure 4-3
Parameter
Function
① Play
When you see this button, it means pause or not played record. Click on this
button, switch to normal play status.
② Stop
Click this button to stop playing.
③ Play by frame
Click on this button to go to next frame.
Note:
You shall pause record when you use this function.
④ Slow
Click on this button to play slowly.
⑤ Quick
Click on this button to play quickly.
⑥ Silent
When this button displays, it means audio is silent. Click on this button to
switch back to normal.
⑦ Volume
Click on left mouse to adjust volume.
⑧ -1 Fisheye
Click this button and fisheye device can adjust display mode according to
different installation mode during the process of playback.
⑧ -2 Rule Info
Click the button and it will playback and display intelligent rules and object
detection box if the video is equipped with intelligent rule info after the
function is enabled, it is off by default.