Dahua Network Camera Web 3.0 - Remote Control; Auto Maintenance

Dahua Network Camera Web 3.0 Operation Manual
130
5.5.6 Remote control
Note:
It is supported by some devices.
Figure 5-116
Parameter
Function
Learn
Bind remote control or wireless alarm with equipment.
Clear
Unbind remote control with equipment.
Arm/Disarm
Start arm after the time you choose, disarm comes into effect immediately. Note:
With disarm status, all the following alarms won’t trigger: motion detect alarm,
masking alarm, local alarm, PIR alarm, wireless alarm.
5.5.5 Auto Maintenance
The auto maintenance interface is shown as in Figure 5-117.
Here you can select auto reboot and auto delete old files interval from the dropdown list.
If you want to use the auto delete old files function, you need to set the file period.