EasyManua.ls Logo

Dahua Network Camera Web 3.0 - Snmp

Dahua Network Camera Web 3.0
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Dahua Network Camera Web 3.0 Operation Manual
62
Figure 5-35
5.2.8 SNMP
The SNMP interface is shown as in Figure 5-36 and Figure 5-37.
The SNMP allows the communication between the network management work station software and the
proxy of the managed device. Please install the software such as MG MibBrowser 8.0c software or
establish the SNMP service before you use this function. You need to reboot the device to activate the
new setup.
Figure 5-36
Please refer to the following sheet for detailed information.

Related product manuals