Dahua Network Camera Web 3.0 - Video Window Image Setup

Dahua Network Camera Web 3.0 Operation Manual
12
3.3 Video Window Setup
The interface is shown as in Figure 3-3.
Figure 3-3
3.3.1 Image Adjustment
See Figure 3-4 for image adjustment.
Figure 3-4
Click this button to display/hide image control interface. Click it to open picture setup interface. This
interface is on the top right pane.
Please refer to Table 3-3 for detailed information.
Parameter
Function
Video
setup
It is to adjust monitor
video brightness.
Note:
 All the operations here apply
to WEB end only.
 Please go to Setup-
>Camera->Conditions to
adjust corresponding items.
It is to adjust monitor
video contrastness.
It is to adjust monitor
video hue.
It is to adjust monitor
video saturation.