Dahua Network Camera Web 3.0 - 6 Alarm

Dahua Network Camera Web 3.0 Operation Manual
134
6 Alarm
Please note some series product does not support this function.
Click alarm function, you can see an interface is shown as in Figure 6-1.
Here you can set device alarm type and alarm sound setup.
Figure 6-1
Please refer to the following sheet for detailed information.
Type
Parameter
Function
Alarm
type
Motion detection
System alarms when motion detection alarm
occurs,
Disk full
System alarms when disk is full.
Disk Error
System records alarm info when disk error
happens.
Video
Tampering
System alarms when video is tampering.
External alarm
Alarm input device sends out alarm.
Illegal Access
System alarms when there is illegal access.
Audio Detection
System alarms when there is audio detect.
IVS
System alarms when IVS event is triggered.
Scene Changing
System will record alarm info when triggering
scene changing.