Dahua Network Camera Web 3.0 User Manual

Dahua Network Camera Web 3.0 Operation Manual
104
Note
Click “Remove All” to remove all the current tasks.
5.3.6 People Counting
5.3.6.1 People Counting
Step 1
Select “Setup > Event > People Counting > People Counting” and the system will display the interface
of “Entrance/Exit”, which is shown in Figure 5-80.
Figure 5-80
Step 2
Select “Enable” to enable statistics function of entrance and exit.
Step 3
Click “Draw Rule” to draw an area in the monitoring image.
Step 4
Click “Draw Target” to draw the size model of filtered target in the video image.
Step 5
It is to set the parameters of entrance and exit, please refer to the following sheet for more details.
Parameter
Function
Enable OSD
Select “Enable OSD” and it will display the people number statistics of
entrance and exit in the monitoring image.

Dahua Network Camera Web 3.0 Specifications

General

Brand	Dahua
Model	Network Camera Web 3.0
Category	Security Camera
Language	English