Click “Check Details” after batch registration is completed, check registration results.
The system will display the interface which is shown in Figure 5-75.
Figure 5-75
5.3.5.2.4 Info Modify
Step 1
Click “More Info” on the interface of face database config. The system will display the interface which is
shown in Figure 5-76.
Figure 5-76
Step 2
It is to set conditions according to the actual needs, click “Search” and the system will display the
interface which is shown in Figure 5-77.
Note
The system will display all the registered faces in the database by default if it fails to set conditions and
click “Search”.
Figure 5-77
To Next Page
Loading...
