Dahua Network Camera Web 3.0 User Manual

Dahua Network Camera Web 3.0 Operation Manual
114
Figure 5-91
Please refer to the following sheet for detailed information.
Parameter
Function
Enable
Check to alarm when SD card is abnormal.
Relay-out
Check to enable relay-out alarm.
Relay out
delay
The alarm output can delay for the specified time after alarm stops. The
value ranges from 10s to 300s.
Note:
No SD card, capacity warning, SD card error, relay-out delay all start
from alarm occurs.
Send
email
After you enabled this function, the system can send out email to alarm
the specified user.
This function is invalid when network is offline or IP conflict occurs.
SD Card
Capacity
Limit
User can set SD card capacity that is left free. When SD card space left
is smaller than this limit, alarm occurs.
When device is offline or IP conflicts, the abnormal alarm is similar with case of SD card error.

Dahua Network Camera Web 3.0 Specifications

General

Brand	Dahua
Model	Network Camera Web 3.0
Category	Security Camera
Language	English