Figure 5-7
When the “Profile Management” is set as “Full Time”, you can select “Always Enable” in “Day” or
“Night’, the system will monitor according to the config of “always enable”.
Figure 5-8
When the “Profile Management” is set as “Schedule”, you can set some period as day and another
period as night, for example, if it sets 0:00~12:00 as day, 12:00~24:00 as night, then the system will
monitor by adopting corresponding config in different periods.
Figure 5-9
Step 3
Click “Save” to complete the settings of profile management.
Note:
To Next Page
Loading...
