Dahua Network Camera Web 3.0 - Page 57

Dahua Network Camera Web 3.0 Operation Manual
49
Figure 5-23
Parameters
Note
Enable
Check “Enable”, then it will display the ROI in the video monitoring window;
Check “Disable”, then it won’t display.
Image
Quality
 Set the image quality of ROI, ranging from 1～6, default is 6.
Note:
For fisheye device, it ranges from 1~6 (best), default is 6 (best)
 Able to set area block, max 4 areas.
5.1.2.5 Path
The storage path interface is shown as in Figure 5-24.
Here you can set snap image saved path and the record storage path.
 The default monitor image path is C:\Users\admin\WebDownload\LiveSnapshot.
 The default monitor record path is C:\Users\admin\WebDownload\LiveRecord.
 The default playback snapshot path is C:\Users\admin\WebDownload\PlaybackSnapshot.
The default playback download path is C:\Users\admin\WebDownload\PlaybackRecord.
The default playback cut path is: C:\Users\admin\WebDownload\VideoClips.
Note:
Admin is locally logged in PC account.
Please click the Save button to save current setup.