Dahua Network Camera Web 3.0 - Page 77

Dahua Network Camera Web 3.0 Operation Manual
69
3. Fill in corresponding “Country”, “Province” and some other information; click “Create” after filling in.
It will show the prompt of “Create Successfully”, which means the server certificate has been
successfully created.
Note:
Make sure the “IP or domain name” is the same as that of the device.
4. Click “Install” and it will install the certificate on the device end, which is shown in Figure 5-44.
Figure 5-44
5. Click “Download”. It will pop out the dialog box of “Save as”, save the file into the computer.