User's Manual
114
5 Local Operations
The following figures are for reference only. Slight difference might be found on the actual page.
5.1 Initialization
Background Information
●
For first-time use, set a login password for the admin account (default user).
●
We recommend setting password protection so that you can reset password in case you forgot.
●
For your device safety, keep your login password well, and change the password regularly.
●
The IP address of the Device is 192.168.1.108 by default.
Procedure
Step 1 Start the NVR.
Step 2 Set region, time zone, and time according to the actual situation, and then click
Next
.
Click to shut down the device. The system integrator or the user can shut down the
Device directly after setting the time zone.
Step 3 Set the login password for the admin account and then click
Next
.
Figure 5-1 Set password
Table 5-1 Password parameters
Parameter Description
User By default, the user is admin.
To Next Page
Loading...
