263
Figure 4-27
Please refer to the following sheet for parameter information.
Parameter Function
Select IP address or the MAC address from the dropdown list
and then input the corresponding information, click Search
button to view the results.
Search
Click Search button, you can view the searched device
information on the list. It includes device IP address, port, device
name, manufacturer and type.
Uninitialized
Click to search the initialized devices. Select an uninitialized
device and then click the Initialize button to set the account.
Preview
Click
to view the preview video of the remote device.
State
It is to display the device has been initialized or not. That is to
say, the remote device has set the initial account information or
not.
means the remote device has initialized, means
the remote device has not been intialized.
Add
Select a device in the list and then click Add button, system can
connect the device automatically and add it to the Added device
list. Or you can double click one item in the list to add a device.
Modify
Click
or any device in the Added device list, you can change
the corresponding channel setup.
To Next Page
Loading...
