Dahua NVR608-32-4KS2 - Page 29

13
SN Name Function
1 Power button Press it once to turn on the device.
Press it for a long time to turn off the device. (Usually we do not
recommend).
Press power button for a long time or pull out the power cable may
result in device auto restart.
2 Syst
em HDD
Indicator light
The blue light becomes on after system booted up properly.
In the system HDD, there are device important configuration file,
factory default configuration file, and device initial boot up data.
3
Alarm indicator
light
The alarm
indicator light becomes on once an alarm occurred. It
becomes on via the software detection. The indicator light becomes
on when there is a local alarm.
4 Network
indicator light
The blue network indicator light is on after you connected the device
to the network.
5 USB port /
6 Front panel lock /
For general NVR616-4KS2 series, the front panel is shown as in Figure 2-4.
Figure 2-4
Please refer to the following sheet for detailed information.
SN Name Function
1 Power button Press it once to turn on the device.
Press it for a long time to turn off the device (Usually we do not
recommend).
Press power button for a long time or pull out the power cable may
result in device auto restart.
2
System HDD
Indicator light
The blue light becomes on after system booted up properly.
In the system HDD, there are device important configuration file,
factory default configuration file, device initial boot up data.
3
Alarm indicator
light
The alarm indicator light becomes on once an alarm occurred. It
becomes on via the software detection. The indicator light becomes
on when there is a local alarm.
4 Network
indicator light
The blue network indicator light is on after you connected the device
to the network.