Dahua NVR608-32-4KS2 - Page 327

311
Figure 4-77
Please select a channel from the dropdown list
Click
to add a rule. The default setup is tripwire, you can double click the rule type name to modify.
See Figure 4-78.
Figure 4-78
Then you can set corresponding parameters.
Click OK button to complete the setup.
4.6.4.3.1.1 Tripwire
From main menu>Setup>Event> IVS>IVS, click you can see the following interface. See Figure
4-79.
System generates an alarm once there is any object crossing the tripwire in the specified direction.
Figure 4-79
Check the Tripwire box to enable tripwire function.
Select SN (Line1/2/3/4) and direction, and then input customized rule name.
 Direction: There are three options: A>B, B>A, both. System can generate an alarm once there is any
object crossing in the specified direction.