54
menu>Setting>Storage>HDD Manager). Please note this function is null if there is only one
HDD.
ANR: It is to save video to the SD card of the network camera in case the network
connection fails. The value ranges from 0s～43200s. After the network connection resumed,
the system can get the video from the SD card and there is no risk of record loss.
Period setup: Click button
after one date or a holiday, you can see an interface shown
as in Figure 3-26.There are five record types: regular, motion detection (MD), Alarm, MD &
alarm and IVS.
Figure 3-26
Please following the steps listed below to draw the period manually.
Step 1 Select a channel you want to set. See Figure 3-27.
Figure 3-27
Step 2 Set record type. See Figure 3-28.
Figure 3-28
Note
When the record type is MD (motion detect), alarm, MD&Alarm, IVS and POS, please enable
the channel record function when corresponding alarm occurs. For example, when the alarm
type is MD, from main menu>Setting>Event>Video Detect>Motion Detect, please select the
record channel and enable record function. See Figure 3-29.
To Next Page
Loading...
