Device Debugging 24
Set parameters by reference to Table 5-1 and click “OK”. The VTO reboots
automatically, and web interface jumps to login interface.
IP address of VTO, which works as SIP server.
Username and password to login SIP server.
Table 5-1
The platform (Express/DSS) works as SIP server.
Select “Server Type” to be “Express/DSS” and set parameters by reference to
Table 5-2 and click “OK”. The VTO reboots automatically, and web interface jumps
to login interface.
IP address of the platform.
SIP domain can be null or default.
Username and password to login SIP server.
Table 5-2
VTO settings have been completed if the platform or another VTO works as SIP server.
If this VTO works as SIP server, “Device Manager” appears in the left parameter tab.
Please add VTO and VTH by reference to “5.1.1.6 Add VTO“ and “5.1.1.7 Add VTH“.
5.1.1.6 Add VTO
Add info about all outdoor stations (VTO).
It is necessary to add VTO only when this VTO works as SIP server.
Login web interface again. Step 1
Select “Household Setting > VTO No. Management”. Step 2
The system displays “VTO No. Management” interface, as shown in Figure 5-9.
To Next Page
Loading...
