Device Debugging 29
The system displays “Network” interface, as shown in
Figure 5-15 or Figure 5-16.
Only devices with the wireless function can access to wireless network.
Figure 5-15
Figure 5-16
Set according to actual network access mode. Step 4
LAN
Enter “Local IP”, “Subnet Mask” and “Gateway”, press [OK]. Or press to enable
DHCP function and obtain IP info automatically.
If the device has WLAN function, please click “WLAN” tab to set it.
WLAN
1) Press to enable Wi-Fi function.
The system displays available Wi-Fi list, as shown in Figure 5-17.
To Next Page
Loading...
