Dahua VTH5421 Series User Manual

Device Debugging 33
Parameter
Description
Server IP
When the platform works as SIP server, server IP is IP address of

the platform.
When VTO works as SIP server, server IP is IP address of the

VTO.
Network Port
When the platform works as SIP server, network port is 5080.

When VTO works as SIP server, network port is 5060.

User Name
Use default value.
Register Pwd
Domain
Registration domain of SIP server, which can be null.
When VTO works as SIP server, registration domain of SIP server shall
be VDP.
User Name
User name and password to login SIP server.
Login Pwd
Table 5-6
Set “Enable Status” to be . Step 5
Enable SIP server function.
Press [OK] to save config. Step 6
5.1.2.5 VTO Config
Add VTO and fence station info; at VTH interface, bind VTH with VTO.
At main interface, press [Setting] for more than 6 seconds. Step 1
The system pops up “Password” prompt box.
Enter the password set during initialization, and press [OK]. Step 2
Press [VTO Config]. Step 3
The system displays “VTO Config” interface, as shown in Figure 5-21.
Figure 5-21
Add VTO or fence station. Step 4
 Add main VTO.
1) Enter “Main VTO Name”, “VTO IP Address”, “User Name” and “Password”.

Dahua VTH5421 Series Specifications

General

Brand	Dahua
Model	VTH5421 Series
Category	Intercom System
Language	English