Dahua XVR5108HS User Manual

326

HDD full: It is to select working mode when hard disk is full. There are two options:
stop recording or overwrite.
◇ Stop: If current HDD is full while there is no idle HDD, then system stops recording,
◇ Overwrite: If the current HDD is full while there is no idle HDD, then system
overwrites the previous files.
Note
DVR does not overwrite the locked files.

Pack duration: Here is for you to specify record duration. There are two ways for you
to set.
◇ Time length: It is to pack according to time. The value ranges from 1 to 60 minutes.
Default value is 60 minutes.
◇ File length: It is to pack according to file length. The default setup is 1024M. The
value ranges from 128M to 2048M.

Auto delete old files:
◇ Never: Do not auto delete old files.
◇ Customized: input customized period here, system can auto delete corresponding old
files.
Figure 4- 39
4.1.4.7 Schedule
Besides startup wizard and configuration wizard, from main
menu->Setting->Storage->Schedule, you can also go to the following interface.

Dahua XVR5108HS Specifications

General

Video Compression	H.265+/H.265/H.264+/H.264
Video Output	1 HDMI, 1 VGA
USB Interface	2 USB 2.0
Power Supply	12V DC/2A
Video Channels	8 channels
HDD Capacity	Up to 6TB
Operating Temperature	-10°C to +55°C (+14°F to +131°F)
Audio Input/Output	1/1 RCA
Internal HDD	1 SATA interface, up to 6TB
Max IP Camera Input	12 channels
Recording Resolution	1080P/720P
HDMI Output	1
VGA Output	1
Operating Humidity	10%–90% (RH), non-condensing
IP Video Input	8+4 channels